Ir para o conteúdo

Part 5: Hello Config

This section will explore how to set up and manage the configuration of your Nextflow pipeline so that you'll be able to customize its behavior, adapt it to different environments, and optimize resource usage without altering a single line of the workflow code itself.

We're going to cover essential components of Nextflow configuration such as config files, profiles, process directives, executors, and parameter files. By learning to utilize these configuration options effectively, you can enhance the flexibility, scalability, and performance of your pipelines.

0. Warmup: Moving to a formal project structure

So far we've been working with a very loose structure, with just one workflow code file and a tiny configuration file that we've mostly ignored, because we were very focused on learning how to implement the workflow itself. However, we're now moving into the phase of this training series that is more focused on code development and maintenance practices.

As part of that, we're going to adopt a formal project structure. We're going to work inside a dedicated project directory called hello-config, and we've renamed the workflow file main.nf to match the recommended Nextflow convention.

0.1. Explore the hello-config directory

We want to launch the workflow from inside the hello-config directory, so let's move into it now.

cd hello-config

Let's take a look at the contents. You can use the file explorer or the terminal; here we're using the output of tree to display the top-level directory contents.

Directory contents
hello-config
├── demo-params.json
├── main.nf
└── nextflow.config

  • main.nf is a workflow based on hello-operators.nf, the workflow produced by completing Part 4 of this training course;

  • nextflow.config is a copy of the original nextflow.config file from the hello-nextflow directory, one level up (where we've been working so far). Whenever there is a file named nextflow.config in the current directory, Nextflow will automatically load configuration from it. The one we have been using contains the following lines:

    nextflow.config
    1
2
    docker.fixOwnership = true
docker.enabled = true

    The docker.fixOwnership = true line is not really interesting. It's a workaround for an issue that sometimes occur with containerized tools that set the wrong permissions on the files they write (which is the case with GenomicsDBImport in the GATK container image in our workflow).

    The docker.enabled = true line is what we care about here. It specifies that Nextflow should use Docker to run process calls that specify a container image. We're going to be playing with that shortly.

Note

Anything you put into the nextflow.config can be overridden at runtime by providing the relevant process directives or parameters and values on the command line, or by importing another configuration file, according to the order of precedence described here.

  • demo-params.json is a parameter file intended for supplying parameter values to a workflow. We will use it in section 5 of this tutorial.

The one thing that's missing is a way to point to the original data without making a copy of it or updating the file paths wherever they're specified. The simplest solution is to link to the data location.

Run this command from inside the hello-config directory:

ln -s ../data data

This creates a symbolic link called data pointing to the data directory, which allows us to avoid having to change anything to how the file paths are set up.

Directory contents
hello-config
├── data -> ../data
├── demo-params.json
├── main.nf
└── nextflow.config

Later we'll cover a better way of handling this, but this will do for now.

0.3. Verify that the initial workflow runs properly

Now that everything is in place, we should be able to run the workflow successfully.

nextflow run main.nf

This should run successfully:

Output
Nextflow 24.09.2-edge is available - Please consider updating your version to it

 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [tender_brahmagupta] DSL2 - revision: 848ff2f9b5

executor >  local (7)
[fb/f755b1] SAMTOOLS_INDEX (1)       [100%] 3 of 3 ✔
[d8/467767] GATK_HAPLOTYPECALLER (1) [100%] 3 of 3 ✔
[ee/2c7855] GATK_JOINTGENOTYPING     [100%] 1 of 1 ✔

There will now be a work directory and a results_genomics directory inside your hello-config directory.

Takeaway

You know what are the two most important files in a Nextflow project: main.nf and its nextflow.config.

What's next?

Learn how to modify basic configuration properties to adapt to your compute environment's requirements.

1. Determine what software packaging technology to use

In the very first part of this training course (Part 1: Hello World) we just used locally installed software in our workflow. Then from Part 2 onward, we've been using Docker containers.

Now, let's pretend we're working on an HPC cluster and the admin doesn't allow the use of Docker for security reasons.

1.1. Disable Docker in the config file

First, we have to switch the value of docker.enabled to false.

Before:

nextflow.config
1
2
docker.fixOwnership = true
docker.enabled = true

After:

nextflow.config
1
2
docker.fixOwnership = true
docker.enabled = false

Let's see what happens if we run that.

1.2. Run the workflow without Docker

We are now launching the main.nf workflow from inside the hello-config directory.

nextflow run main.nf

As expected, the run fails with an error message that looks like this:

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `hello-config/main.nf` [silly_ramanujan] DSL2 - revision: 9129bc4618

executor >  local (3)
[93/4417d0] SAMTOOLS_INDEX (1)   [  0%] 0 of 3
[-        ] GATK_HAPLOTYPECALLER -
[-        ] GATK_JOINTGENOTYPING -
ERROR ~ Error executing process > 'SAMTOOLS_INDEX (2)'

Caused by:
  Process `SAMTOOLS_INDEX (2)` terminated with an error exit status (127)

Command executed:

  samtools index 'reads_father.bam'

Command exit status:
  127

Command output:
  (empty)

Command error:
  .command.sh: line 2: samtools: command not found

Command not found? Of course, we don't have Samtools installed in our environment, and we can no longer use the Docker container. What to do?

Note

Nextflow supports multiple other container technologies such as including Singularity (which is more widely used on HPC), and software package managers such as Conda.

Let's try using Conda environments for our workflow.

1.3. Enable Conda in the configuration file

First, we need to add a directive enabling the use of Conda, right after the line that controls the use of Docker. And while we're at it, let's put a blank line before those two to emphasize the logical grouping.

Before:

nextflow.config
1
2
docker.fixOwnership = true
docker.enabled = false

After:

nextflow.config
1
2
3
4
docker.fixOwnership = true

docker.enabled = false
conda.enabled = true

This should allow Nextflow to create and utilize Conda environments for processes that have Conda packages specified. Which means we now need to add those to our processes!

1.4. Specify Conda packages in the process definitions

We know that the Bioconda project provides Conda packages for Samtools and GATK, so we just need to retrieve their URIs and add them to the corresponding process definitions using the conda directive.

Note

There are a few different ways to get the URI for a given conda package. We recommend using the Seqera Containers search query, which will give you a URI that you can copy paste, even if you're not creating a container.

For your convenience, we are providing the URIs below. Just make sure to add the conda directive. To be clear, we're not replacing the docker directive, just adding an alternative option.

1.4.1. Update SAMTOOLS_INDEX

The URI is "bioconda::samtools=1.20".

Before:

main.nf
22
23
24
25
26
process SAMTOOLS_INDEX {

    container 'community.wave.seqera.io/library/samtools:1.20--b5dfbd93de237464'

    publishDir params.outdir, mode: 'symlink'

After:

main.nf
22
23
24
25
26
27
process SAMTOOLS_INDEX {

    container "community.wave.seqera.io/library/samtools:1.20--b5dfbd93de237464"
    conda "bioconda::samtools=1.20"

    publishDir params.outdir, mode: 'symlink'

1.4.2. Update GATK_HAPLOTYPECALLER

The URI is "bioconda::gatk4=4.5.0.0".

Before:

main.nf
43
44
45
46
47
process GATK_HAPLOTYPECALLER {

    container "community.wave.seqera.io/library/gatk4:4.5.0.0--730ee8817e436867"

    publishDir params.outdir, mode: 'symlink'

After:

main.nf
43
44
45
46
47
48
process GATK_HAPLOTYPECALLER {

    container "community.wave.seqera.io/library/gatk4:4.5.0.0--730ee8817e436867"
    conda "bioconda::gatk4=4.5.0.0"

    publishDir params.outdir, mode: 'symlink'

1.4.3. Update GATK_JOINTGENOTYPING

The URI is "bioconda::gatk4=4.5.0.0".

Before:

main.nf
74
75
76
77
78
process GATK_JOINTGENOTYPING {

    container "community.wave.seqera.io/library/gatk4:4.5.0.0--730ee8817e436867"

    publishDir params.outdir, mode: 'symlink'

After:

main.nf
74
75
76
77
78
79
process GATK_JOINTGENOTYPING {

    container "community.wave.seqera.io/library/gatk4:4.5.0.0--730ee8817e436867"
    conda "bioconda::gatk4=4.5.0.0"

    publishDir params.outdir, mode: 'symlink'

Once all three processes are updated, we can try running the workflow again.

1.5. Run the workflow to verify that it can use Conda

Let's try it out.

nextflow run main.nf

This will take a bit longer than usual the first time, and you might see the console output stay 'stuck' at this stage for a minute or so:

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [extravagant_thompson] DSL2 - revision: 848ff2f9b5

[-        ] SAMTOOLS_INDEX       -
[-        ] GATK_HAPLOTYPECALLER -
[-        ] GATK_JOINTGENOTYPING -
Creating env using conda: bioconda::samtools=1.20 [cache /workspace/gitpod/hello-nextflow/hello-config/work/conda/env-6684ea23d69ceb1742019ff36904f612]

That's because Nextflow has to retrieve the Conda packages and create the environment, which takes a bit of work behind the scenes. The good news is that you don't need to deal with any of it yourself!

After a few moments, it should spit out some more output, and eventually complete without error.

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [silly_goldstine] DSL2 - revision: a60f9fd6af

executor >  local (7)
[23/b59106] SAMTOOLS_INDEX (1)       [100%] 3 of 3 ✔
[da/e1bf1d] GATK_HAPLOTYPECALLER (1) [100%] 3 of 3 ✔
[2e/e6ffca] GATK_JOINTGENOTYPING     [100%] 1 of 1 ✔

And from our standpoint, it looks like it works exactly the same as running with Docker, even though on the backend the mechanics are a bit different.

This means we're all set to run with Conda environments if needed.

Note

Since these directives are assigned per process, it is possible 'mix and match', i.e. configure some of the processes in your workflow to run with Docker and others with Conda, for example, if the compute infrastructure you are using supports both. In that case, you would enable both Docker and Conda in your configuration file. If both are available for a given process, Nextflow will prioritize containers.

And as noted earlier, Nextflow supports multiple other software packaging and container technologies, so you are not limited to just those two.

Takeaway

You know how to configure which software package each process should use, and how to switch between technologies.

What's next?

Learn how to use profiles to make selecting an option easier.

2. Use profiles to select preset configurations

Profiles are a great way to adapt your workflow configuration by selecting preset options at runtime, to avoid having to edit a file every time you want to run something differently.

2.1. Create profiles for switching between Docker and Conda

Setting up these profiles mainly involves restructuring how we specify the docker and conda directives.

Before:

nextflow.config
1
2
3
4
docker.fixOwnership = true

docker.enabled = false
conda.enabled = true

After:

nextflow.config
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
docker.fixOwnership = true

profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
}

This makes it possible to activate one or the other by specifying a profile in our Nextflow run command line.

2.2. Run the workflow with a profile

Let's try running the workflow with Conda.

nextflow run main.nf -profile conda_on

It works! Convenient, isn't it?

 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [sharp_gauss] DSL2 - revision: 66cd7c255a

executor >  local (7)
[f4/ef2cb6] SAMTOOLS_INDEX (1)       [100%] 3 of 3 ✔
[70/77152c] GATK_HAPLOTYPECALLER (1) [100%] 3 of 3 ✔
[a6/0f72fd] GATK_JOINTGENOTYPING     [100%] 1 of 1 ✔

Feel free to try it out with the Docker profile too. You just have to switch -profile conda_on to -profile docker_on in the command.

Takeaway

You know how to use profiles to select a preset configuration at runtime with minimal hassle.

What's next?

Learn how to change the executor used by Nextflow to actually do the work.

3. Determine what executor(s) should be used to do the work

Until now, we have been running our pipeline with the local executor. This runs each step on the same machine that Nextflow is running on. However, for large workloads, you will typically want to use a distributed executor such as an HPC or cloud. Nextflow supports several different distributed executors, including:

  • HPC (SLURM, PBS, SGE)
  • AWS Batch
  • Google Batch
  • Azure Batch
  • Kubernetes
  • GA4GH TES

The executor is subject to a process directive called executor. By default it is set to local, so the following configuration is implied:

Built-in configuration
process {
    executor = 'local'
}

Let's look at what it would take to using a Slurm scheduler, assuming we had a connection to a cluster and Slurm was installed appropriately.

Warning

What follows is for demonstration purposes but will not execute the work since we don't have access to an external executor.

3.1. Set up a Slurm executor

Add the following lines to the nextflow.config file:

nextflow.config
12
13
14
process {
    executor = 'slurm'
}

And... that's it! As noted before, this does assume that Slurm itself is already set up for you, but this is really all Nextflow itself needs to know.

Basically we are telling Nextflow to generate a Slurm submission script and submit it using an sbatch command.

3.2. Launch the workflow to generate the job submission script

Let's try running this; even though we know it won't execute (since we don't have Slurm set up in this Gitpod environment) we'll be able to see what the submission script looks like.

nextflow run main.nf -profile conda_on

As expected, this fails with a fairly unambiguous error:

Output
nextflow
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [grave_gauss] DSL2 - revision: 66cd7c255a

[-        ] SAMTOOLS_INDEX       [  0%] 0 of 3
[eb/2962ce] SAMTOOLS_INDEX (3)   [ 33%] 1 of 3, failed: 1
[-        ] GATK_HAPLOTYPECALLER -
[-        ] GATK_JOINTGENOTYPING -
ERROR ~ Error executing process > 'SAMTOOLS_INDEX (3)'

Caused by:
  java.io.IOException: Cannot run program "sbatch" (in directory "/workspace/gitpod/hello-nextflow/hello-config/work/eb/2962ce167b3025a41ece6ce6d7efc2"): error=2, No such file or directory

Command executed:

  sbatch .command.run

However, it did produce what we are looking for: the .command.run file that Nextflow tried to submit to Slurm via the sbatch command.

Let's take a look inside.

.command.run
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
#!/bin/bash
#SBATCH -J nf-SAMTOOLS_INDEX_(1)
#SBATCH -o /home/gitpod/work/34/850fe31af0eb62a0eb1643ed77b84f/.command.log
#SBATCH --no-requeue
#SBATCH --signal B:USR2@30
NXF_CHDIR=/home/gitpod/work/34/850fe31af0eb62a0eb1643ed77b84f
### ---
### name: 'SAMTOOLS_INDEX (1)'
### container: 'community.wave.seqera.io/library/samtools:1.20--b5dfbd93de237464'
### outputs:
### - 'reads_father.bam'
### - 'reads_father.bam.bai'
### ...

This shows the job submission details that Nextflow is trying to hand over to Slurm.

Note

There other options that we could additionally set using other process directives to control resource allocations, which we'll get to in a little bit. These would also be included in the .command.run file and directly passed to the Slurm execution.

You can try using any of the other supported executors in the same way. Nextflow will translate the values submitted to the executor into the appropriate equivalent instructions.

Conveniently, you can also set up profiles to select which executor you want to use at runtime, just like we did for the Docker vs. Conda environments selection earlier.

3.3. Set up profiles for executors too

Let's replace the process block we had added with the executor selection profiles.

Before:

nextflow.config
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
}

process {
    executor = 'slurm'
}

After:

nextflow.config
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
    local_exec {
        process.executor = 'local'
    }
    slurm_exec {
        process.executor = 'slurm'
    }
}

Although it may look like these are going to be mutually exclusive, you can actually combine multiple profiles. Let's try that now.

3.4. Run with a combination of profiles

To use two profiles at the same time, simply give both to the -profile parameter, separated by a comma.

nextflow run main.nf -profile docker_on,local_exec

With that, we've returned to the original configuration of using Docker containers with local execution, not that you can tell from the console output:

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [irreverent_bassi] DSL2 - revision: 66cd7c255a

executor >  local (7)
[17/82bbc4] SAMTOOLS_INDEX (2)       [100%] 3 of 3 ✔
[8e/93609c] GATK_HAPLOTYPECALLER (2) [100%] 3 of 3 ✔
[e6/df6740] GATK_JOINTGENOTYPING     [100%] 1 of 1 ✔

The point is, we can now use profiles to switch to a different software packaging system (Conda) or a different executor (such as Slurm) with a single command-line option. For example, if we were back on our hypothetical HPC from earlier, we would switch to using -profile conda_on,slurm_exec in our Nextflow command line.

Feel free to test that on your own to satisfy yourself that it works as expected.

Moving on, we're going to take this logic a step further, and set up dedicated profiles for groups of configuration elements that we usually want to activate together.

3.5. Create profiles that combine several configuration elements

Let's set up some dedicated profiles for the two case figures we've been envisioning: running locally with Docker, which we'll call my_laptop, and running on the HPC cluster with Conda, which we'll call univ_hpc.

Before:

nextflow.config
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
    local_exec {
        process.executor = 'local'
    }
    slurm_exec {
        process.executor = 'slurm'
    }
}

After:

nextflow.config
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
    my_laptop {
        process.executor = 'local'
        docker.enabled = true
    }
    univ_hpc {
        process.executor = 'slurm'
        conda.enabled = true
    }
}

Now we have profiles for the two main case figures we've been considering. If in the future we find other elements of configuration that are always co-occurring with these, we can simply add them to the corresponding profile(s).

Feel free to test these new profiles on your own using either -profile my_laptop or -profile univ_hpc. Just remember that the univ_hpc one won't work unless you run it in an environment that is set up appropriately to use Slurm.

Note

You'll notice we've removed the two profiles that only specified the executor, because in those cases we're always going to want to specify the software packaging technology too.

We're leaving in the Docker and Conda profiles because those ones come in handy by themselves, although there are also some dedicated command line flags for those, and it's a nice illustration of the fact that you can have the same directives set in multiple profiles. Just keep in mind that if you combine profiles with conflicting settings for the same directives, you might be surprised by the results.

Takeaway

You now know how to change the executor and combine that with other environment settings using profiles.

What's next?

Learn how to control the resources allocated for executing processes.

4. Allocate compute resources with process directives

We've covered how to control what compute environment Nextflow is going to use to run the workflow, so now the next logical question is, how do we control the resources (CPU, memory etc) that will be allocated?

The answer may not surprise you; it's process directives again.

4.1. Increase default process resource allocations

By default, Nextflow will use a single CPU and 2GB of memory for each process. Let's say we decide to double that.

We can modify this behavior by setting the cpu and memory directives in the process block. Add the following to the end of your nextflow.config file:

nextflow.config
20
21
22
23
24
process {
    // defaults for all processes
    cpus = 2
    memory = 4.GB
}

4.2. Run the workflow with the increased defaults

Let's try that out, bearing in mind that we need to keep -profile my_laptop in the command going forward.

nextflow run main.nf -profile my_laptop

You may not notice any real difference in how quickly this runs, since this is such a small workload. But if you have a machine with few CPUs and you allocate a high number per process, you might see process calls getting queued behind each other. This is because Nextflow will ensure we aren't using more CPUs than are available.

Tip

You can check the number of CPUs allocated to a given process by looking at the .command.run log in its work directory. There will be a function called nxf_launch() that includes the command docker run—i—-CPU 1024, where --cpu-shares refers to the CPU time given to this process' tasks. Setting one task's cpu_share to 512 and another to 1024 means that the second task will get double the amount of CPU time as the first.

You're probably wondering if you can set resource allocations per individual process, and the answer is of course yes, yes you can! We'll show you how to do that in a moment.

But first, let's talk about how you can find out how much CPU and memory your processes are likely to need. The classic approach is to do resource profiling, meaning you run the workflow with some default allocations, record how much each process used, and from there, estimate how to adjust the base allocations.

The truly excellent news on this front is that Nextflow includes built-in tools for doing this, and will happily generate a report for you on request. Let's try that out.

4.3. Run the workflow to generate a resource utilization report

To have Nextflow generate the report automatically, simply add -with-report <filename>.html to your command line.

nextflow run main.nf -profile my_laptop -with-report report-config-1.html

The report is an html file, which you can download and open in your browser. You can also right click it in the file explorer on the left and click on Show preview in order to view it on Gitpod.

Take a few minutes to look through the report and see if you can identify some opportunities for adjusting resources. Make sure to click on the tabs that show the utilization results as a percentage of what was allocated. There is some documentation describing all the available features.

One observation is that the GATK_JOINTGENOTYPING seems to be very hungry for CPU, which makes sense since it performs a lot of complex calculations. So we could try boosting that and see if it cuts down on runtime.

However, we seem to have overshot the mark with the memory allocations; all processes are only using a fraction of what we're giving them. We should dial that back down and save some resources.

4.4. Adjust resource allocations for a specific process

We can specify resource allocations for a given process using the withName process selector. The syntax looks like this when it's by itself in a process block:

Syntax
process {
    withName: 'GATK_JOINTGENOTYPING' {
        cpus = 4
    }
}

Let's add that to the existing process block in the nextflow.config file.

nextflow.config
11
12
13
14
15
16
17
18
19
process {
    // defaults for all processes
    cpus = 2
    memory = 2.GB
    // allocations for a specific process
    withName: 'GATK_JOINTGENOTYPING' {
        cpus = 4
    }
}

With that specified, the default settings will apply to all processes except the GATK_JOINTGENOTYPING process, which is a special snowflake that gets a lot more CPU. Hopefully that should have an effect.

4.5. Run again with the modified configuration

Let's run the workflow again with the modified configuration and with the reporting flag turned on, but notice we're giving the report a different name so we can differentiate them.

nextflow run main.nf -profile my_laptop -with-report report-config-2.html

Once again, you probably won't notice a substantial difference in runtime, because this is such a small workload and the tools spend more time in ancillary tasks than in performing the 'real' work.

However, the second report shows that our resource utilization is more balanced now.

As you can see, this approach is useful when your processes have different resource requirements. It empowers you to right-size the resource allocations you set up for each process based on actual data, not guesswork.

Note

This is just a tiny taster of what you can do to optimize your use of resources. Nextflow itself has some really neat dynamic retry logic built in to retry jobs that fail due to resource limitations. Additionally, the Seqera Platform offers AI-driven tooling for optimizing your resource allocations automatically as well.

We'll cover both of those approaches in an upcoming part of this training course.

That being said, there may be some constraints on what you can (or must) allocate depending on what computing executor and compute infrastructure you're using. For example, your cluster may require you to stay within certain limits that don't apply when you're running elsewhere.

4.6. Add resource limits to an HPC profile

You can use the resourceLimits directive to set the relevant limitations. The syntax looks like this when it's by itself in a process block:

Syntax
process {
    resourceLimits = [
        memory: 750.GB,
        cpus: 200,
        time: 30.d
    ]
}

Let's add this to the univ_hpc profile we set up earlier.

Before:

nextflow.config
    univ_hpc {
        process.executor = 'slurm'
        conda.enabled = true
    }

After:

nextflow.config
    univ_hpc {
        process.executor = 'slurm'
        conda.enabled = true
        process.resourceLimits = [
            memory: 750.GB,
            cpus: 200,
            time: 30.d
        ]
    }

We can't test this since we don't have a live connection to Slurm in the Gitpod environment. However, you can try running the workflow with resource allocations that exceed these limits, then look up the sbatch command in the .command.run script file. You should see that the requests that actually get sent to the executor are capped at the values specified by resourceLimits.

Note

The nf-core project has compiled a collection of configuration files shared by various institutions around the world, covering a wide range of HPC and cloud executors.

Those shared configs are valuable both for people who work there and can therefore just utilize their institution's configuration out of the box, and for people who are looking to develop a configuration for their own infrastructure.

Takeaway

You know how to allocate process resources, tweak those allocations based on the utilization report, and use a profile to adapt the allocations to the compute environment.

What's next?

Configuring the parameters destined for the tools and operations wrapped within processes.

5. Configure workflow parameters

So far we've been exploring options for configuring how Nextflow behaves in terms of executing the work. That's all well and good, but how do we manage the parameters that are meant for the workflow itself, and the tools it calls within the processes? That is also something we should be able to do without editing code files every time we want to run on some new data or switch to a different set of reference files.

As it turns out, there's a lot of overlap between this kind of configuration and the infrastructure configuration, starting with the nextflow.config file, which can also house default values for command line parameters.

5.1. Move the default parameter declarations to the configuration file

We originally stored all our default parameter values in the workflow script itself, but we can move them out into the nextflow.config file if we prefer.

So let's cut this set of params out of main.nf:

main.nf
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
/*
 * Pipeline parameters
 */

// Primary input (file of input files, one per line)
params.reads_bam = "${projectDir}/data/sample_bams.txt"

// Output directory
params.outdir    = 'results_genomics'

// Accessory files
params.reference        = "${projectDir}/data/ref/ref.fasta"
params.reference_index  = "${projectDir}/data/ref/ref.fasta.fai"
params.reference_dict   = "${projectDir}/data/ref/ref.dict"
params.intervals        = "${projectDir}/data/ref/intervals.bed"

// Base name for final output file
params.cohort_name = "family_trio"

And let's stick it into the nextflow.config file.

Note

It doesn't really matter where we put it into the file, as long as we keep the params together and avoid mixing them in with the infrastructure configuration, for the sake of readability. So putting it at the end will do just fine.

5.2. Run the workflow with -resume to verify that it still works

Let's check that we haven't broken anything, and let's include the -resume flag.

nextflow run main.nf -profile my_laptop -resume

Not only does everything work, but all of the process calls are recognized as having been run previously.

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [modest_kay] DSL2 - revision: 328869237b

[d6/353bb0] SAMTOOLS_INDEX (3)       [100%] 3 of 3, cached: 3 ✔
[dc/2a9e3f] GATK_HAPLOTYPECALLER (2) [100%] 3 of 3, cached: 3 ✔
[fe/a940b2] GATK_JOINTGENOTYPING     [100%] 1 of 1, cached: 1 ✔

Indeed, having moved the parameter values to a different file changes nothing to the command submission that Nextflow generates. The resumability of the pipeline is preserved.

5.3. Streamline the syntax of the parameter defaults

Now that our default parameter declarations are in nextflow.config, we can switch to using a more structured syntax using a params block. That allows us to remove the repeated params..

nextflow.config
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
/*
 * Pipeline parameters
 */

params {
    // Primary input (file of input files, one per line)
    reads_bam        = "${projectDir}/data/sample_bams.txt"

    // Output directory
    params.outdir    = 'results_genomics'

    // Accessory files
    reference        = "${projectDir}/data/ref/ref.fasta"
    reference_index  = "${projectDir}/data/ref/ref.fasta.fai"
    reference_dict   = "${projectDir}/data/ref/ref.dict"
    intervals        = "${projectDir}/data/ref/intervals.bed"

    // Base name for final output file
    cohort_name      = "family_trio"
}

Feel free to re-run this with the same command as above to verify that it works and still preserves the resumability of the pipeline.

At this point, you may be wondering how to provide actual data and reference files to run this workflow for real, since what we've put in here is just a tiny test set.

There are several options. As we mentioned earlier (see note at the start of this page), you can override the defaults specified in the nextflow.config file by providing directives or parameter values on the command line, or by importing other configuration files.

In this particular case, the best solution is to use a parameter file, which is a JSON file containing key-value pairs for all of the parameters you want to supply values for.

5.4. Using a parameter file to override defaults

We provide a parameter file in the current directory, called demo-params.json, which contains key-value pairs for all of the parameters our workflow expects. The values are the same input files and reference files we've been using so far.

demo-params.json
1
2
3
4
5
6
7
8
9
{
    "reads_bam": "data/sample_bams.txt",
    "outdir": "results_genomics",
    "reference": "data/ref/ref.fasta",
    "reference_index": "data/ref/ref.fasta.fai",
    "reference_dict": "data/ref/ref.dict",
    "intervals": "data/ref/intervals.bed",
    "cohort_name": "family_trio"
}

To run the workflow with this parameter file, simply add -params-file demo-params.json to the base command.

nextflow run main.nf -profile my_laptop -params-file demo-params.json

It works! And as expected, this produces the same outputs as previously.

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [marvelous_mandelbrot] DSL2 - revision: 328869237b

executor >  local (7)
[63/23a827] SAMTOOLS_INDEX (1)       [100%] 3 of 3 ✔
[aa/60aa4a] GATK_HAPLOTYPECALLER (2) [100%] 3 of 3 ✔
[35/bda5eb] GATK_JOINTGENOTYPING     [100%] 1 of 1 ✔

However, you may be thinking, well, did we really override the configuration? How would we know, since those were the same files?

5.5. Remove or generalize default values from nextflow.config

Let's strip out all the file paths from the params block in nextflow.config, replacing them with null, and replace the cohort_name value with something more generic.

Before:

nextflow.config
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
params {
    // Primary input (file of input files, one per line)
    reads_bam        = "${projectDir}/data/sample_bams.txt"

    // Output directory
    outdir           = 'results_genomics'

    // Accessory files
    reference        = "${projectDir}/data/ref/ref.fasta"
    reference_index  = "${projectDir}/data/ref/ref.fasta.fai"
    reference_dict   = "${projectDir}/data/ref/ref.dict"
    intervals        = "${projectDir}/data/ref/intervals.bed"

    // Base name for final output file
    cohort_name      = "family_trio"
}

After:

nextflow.config
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
params {
    // Primary input (file of input files, one per line)
    reads_bam        = null

    // Output directory
    outdir           = null

    // Accessory files
    reference        = null
    reference_index  = null
    reference_dict   = null
    intervals        = null

    // Base name for final output file
    cohort_name      = "my_cohort"
}

Now, if you run the same command again, it will still work. So yes, we're definitely able to pull those parameter values from the parameter file.

This is great because, with the parameter file in hand, we'll now be able to provide parameter values at runtime without having to type massive command lines and without modifying the workflow nor the default configuration.

That being said, it was nice to be able to demo the workflow without having to keep track of filenames and such. Let's see if we can use a profile to replicate that behavior.

5.6. Create a demo profile

Yes we can! We just need to retrieve the default parameter declarations as they were written in the original workflow (with the params.* syntax) and copy them into a new profile that we'll call demo.

Before:

nextflow.config
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
    my_laptop {
        process.executor = 'local'
        docker.enabled = true
    }
    univ_hpc {
        process.executor = 'slurm'
        conda.enabled = true
        process.resourceLimits = [
            memory: 750.GB,
            cpus: 200,
            time: 30.d
        ]
    }
}

After:

nextflow.config
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
profiles {
    docker_on {
        docker.enabled = true
    }
    conda_on {
        conda.enabled = true
    }
    my_laptop {
        process.executor = 'local'
        docker.enabled = true
    }
    univ_hpc {
        process.executor = 'slurm'
        conda.enabled = true
        process.resourceLimits = [
            memory: 750.GB,
            cpus: 200,
            time: 30.d
        ]
    }
    demo {
        // Primary input (file of input files, one per line)
        params.reads_bam        = "data/sample_bams.txt"

        // Output directory
        params.outdir           = 'results_genomics'

        // Accessory files
        params.reference        = "data/ref/ref.fasta"
        params.reference_index  = "data/ref/ref.fasta.fai"
        params.reference_dict   = "data/ref/ref.dict"
        params.intervals        = "data/ref/intervals.bed"

        // Base name for final output file
        params.cohort_name      = "family_trio"
    }
}

As long as we distribute the data bundle with the workflow code, this will enable anyone to quickly try out the workflow without having to supply their own inputs or pointing to the parameter file. Besides, we can provide URLs to where files are stored and Nextflow will download them automatically.

5.7. Run with the demo profile

Let's try that out:

nextflow run main.nf -profile my_laptop,demo

And it works perfectly!

Output
 N E X T F L O W   ~  version 24.10.0

 ┃ Launching `main.nf` [cheesy_shaw] DSL2 - revision: 328869237b

executor >  local (7)
[4f/5ea14f] SAMTOOLS_INDEX (1)       [100%] 3 of 3 ✔
[fc/761e86] GATK_HAPLOTYPECALLER (3) [100%] 3 of 3 ✔
[8a/2f498f] GATK_JOINTGENOTYPING     [100%] 1 of 1 ✔

Imagine what we can do with this tooling in place. For example, we could also add profiles with popular sets of reference files to save people the trouble of providing their own.

Takeaway

You know how to manage parameter defaults, override them at runtime using a parameter file, and set up profiles.

What's next?

Celebrate and relax. Then we'll move on to learning how to modularize the workflow code for optimal maintainability and reuse.